Cottage Grove, MNPipe Repair(651) 555-0100
Back to guides

Published October 8, 2026

What to Do When a Pipe Bursts: A Step-by-Step Guide

A burst pipe can release hundreds of gallons of water in a few hours. The first few minutes matter most — what you do before the plumber arrives decides whether you are mopping a puddle or replacing a ceiling. Keep these steps in mind before you need them, and if water is spreading right now, start with step one and call for help.

1. Shut off the water at the main valve

Find your main shutoff valve, usually near the front wall where the water line enters the house, in the basement, or in the garage. Turn it clockwise until it stops. This stops the flow into the broken line and is the single most important thing you can do — every minute the water keeps running, the damage spreads further into floors, walls, and ceilings.

If you cannot find the valve, or it will not turn, call an emergency plumber right away and keep towels or buckets ready. Valves that have not been touched in years can seize up, which is why it is worth finding yours and testing it before winter. If the valve is stuck, do not force it with a wrench — a broken valve is a second emergency. A plumber can shut the water off at the street if needed.

2. Protect yourself and your electrical system

If water is near outlets, a fuse box, or any electrical equipment, switch off the power to that area at the breaker panel. Water and electricity are a dangerous combination, and a wet outlet or appliance can shock you even if the water looks shallow.

Do not walk through standing water to reach the panel. If you cannot reach it safely, leave the area and call the utility company. The same goes for gas appliances: if water has reached a furnace or water heater, do not touch it — let a professional check it before you turn anything back on.

3. Drain the pipes and reduce the damage

Open the nearest faucet to release pressure and drain remaining water from the lines. If the burst is on an upper floor, also open a faucet on the lowest floor so gravity helps empty the system. This will not stop water that is already out, but it limits how much more escapes.

Move valuables, rugs, and furniture off wet floors. Place buckets under active drips and use towels to slow the spread. If water is coming through a ceiling, place a bucket under the drip and, if the ceiling is bulging, poke a small hole with a screwdriver to let the water drain in a controlled way rather than bringing the whole section down.

4. What not to do

Do not try to thaw a frozen section with an open flame — a torch or heat gun held too close can start a fire inside a wall or melt PEX piping. A hair dryer on a low setting, aimed at the pipe from a safe distance, is the only heat source a homeowner should use, and only if the pipe has not already burst.

Do not ignore a small leak and hope it stops. A pinhole leak is often the first sign that a line is failing, and in freezing weather it can become a full burst overnight. And do not delay calling because it is late or a weekend — emergency plumbers work around the clock precisely because water damage does not wait for business hours.

5. Document everything for your insurance claim

Take photos and short videos of the broken pipe, the water damage, and any affected belongings before you clean up. Keep the damaged section of pipe if your plumber can save it. Insurers ask for this evidence, and clear records speed up claims.

Write down the time you discovered the leak, when you shut off the water, and who you called. Keep receipts for any emergency work, fans, or dehumidifiers you rent. Many homeowners policies cover sudden, accidental water damage from a burst pipe, though the pipe repair itself is often treated separately from the water damage claim — check with your insurer about your coverage.

6. Call a licensed emergency plumber

Once the water is off, call for burst pipe repair. Tell the dispatcher where the water is coming from, whether you have shut off the main valve, and whether water is near anything electrical. That information helps the technician arrive prepared with the right parts.

A good technician will cut out the damaged section, install a permanent replacement, and check the rest of the system for weak points so you are not back in the same situation next month. Ask what caused the failure — knowing whether it was freezing, corrosion, or pressure helps you prevent the next one.

7. After the repair

Once the pipe is fixed, the drying is not over. Wet drywall, insulation, and subfloor can grow mold within a day or two, so run fans and a dehumidifier in the affected area for at least 48 hours — or have our water damage restoration team dry the structure properly. If carpet or padding stayed wet for more than a day, it usually needs to be removed.

Watch your next water bill for a spike — it can reveal a second, hidden leak. And use the experience: insulate the line that failed, find your main shutoff if you did not know where it was, and consider a water alarm for the basement. The cheapest burst pipe is the one that never happens.

Dealing with a burst pipe now?

Do not wait. Call (651) 555-0100 and our 24/7 team will help you stop the water.

(651) 555-0100